SmartDrive SpeedControl Dial
$685.00
Start, stop, and change your speed on-the-go.
The SpeedControl Dial offers another way to use your SmartDrive MX2+. It brings next-level control and intuitiveness to SmartDrive. Users are now able to start, stop, and adjust their speeds by simply rotating the dial forwards or backwards.
The SpeedControl dial is wired and is powered directly by the SmartDrive unit, so there is no need to charge two devices, and setup takes less than 5 minutes. It mounts directly to the wheelchair frame, and an Extension Arm is available for increased adjustability.
Out of stock
More Information
SpeedControl Features:
Simple setup
SpeedControl can be easily mounted directly to the frame or with the optional extended mount in under 5 minutes.
Wired controller
SpeedControl’s reinforced wire provides a reliable connection that’s easy to install and allows it to be powered by the SmartDrive unit. No need to charge two devices!
Intuitive to learn
SmartDrive setup and training is now faster and easier than ever with this simple controller.
Extended mount option
This optional mount gives increased adjustability and can be easily rotated for transfers.
Incredibly easy to operate:
Step One
Rotate the dial to its ‘”STOP” limit.
Step Two
Press against the face of SpeedControl Dial until LED turns on.
Step Three
Rotate the dial forward until you reach your desired speed. Adjust your speed by rotating the dial forward or backward.
Step Four
To stop, rotate back to the “STOP” limit and hold your handrails. Press against the face of the SpeedControl to turn power assist off.
Warranty Information
The SmartDrive MX2+ has a two year limited warranty on materials and workmanship. You can download detailed warranty information here.
Product Compliance with Relevant Standards
The SmartDrive MX2+ has been tested to and complies with the following standards:
- AS/NZS 60335.2.29:2004
- ISO 7176-14/-21
- EN 12184
- IEC 62133-2
- IEC 61000
ARTG Certificate: 202708
